Two series of regular seminars have been given during 94/95. These and other seminars given at the department are listed below.
'Fikaseminarier' -- a fluid mechanics seminar series Coordinatorer: T. Burden
September 21.7truecm Sima Zahrai, Dept. of Mechanics:
Numerical methods for simulation of the dewatering process in paper machines
September 28.7truecm Lars Bäuerle, Dept. of Mechanics:
Ytspänningsdriven konvektion i öppen cylindrisk behållare
October 5.7truecm Lars-Göran Sundström, Dept. of Mechanics:
Laminar natural convection in an inclined enclosure
October 19.7truecm Daniel Söderberg, Dept. of Mechanics:
Studier av stabilitet hos plana vätskestrålar
October 26.7truecm Jukka Komminaho, Dept. of Mechanics:
Numerical simulation of fully developed plane turbulent Couette flow
November 2.7truecm Petra Wikström, Dept. of Mechanics:
Measurements of temperature fluctuations and temperature dissipation in a heated
cylinder wake
November 9.7truecm Stellan Berlin, Dept. of Mechanics:
Numerical simulations of disturbances in incompressible boundary layers
November 16.7truecm Mats Nigam, Dept. of Mechanics:
Analytical methods for simulation of the dewatering process in paper machines
November 30.7truecm Torbjörn Sjögren, Dept. of Mechanics:
Measurement and modelling of anisotropic dissipation and slow pressure-strain in
homogeneous turbulence
December 7.7truecm Krister Alvelius, Dept. of Mechanics:
Large-Eddy Simulation in homogeneous turbulence
December 14.7truecm Ardeshir Hanifi, Dept. of Mechanics:
Nonlocal stability of compressible boundary layer
Janaury 18.7truecm V.V. Kozlov, Novosibirsk, Russia:
Laminar separation --- successes and problems
Janaury 25.7truecm Robert Tönhardt, Dept. of Mechanics:
Crystal growth with adaptive FEM
February 1*.7truecm Hasse Fredriksson, Dept. of Materials
Processing:
On the mechanism of convection during a solidification process
February 8.7truecm Ben Diedrich, Luleå University:
Three-dimensional disturbances; considering starting profiles and optimal
profiles in Couette and Poisuielle flow
February 15.7truecm Andrey Bakchinov, Novosibirsk, Russia:
On the flat plate boundary layer receptivity to localized disturbances of
moderate amplitude
February 22.7truecm Magnus Olsson, Dept. of Mechanics:
Simulation of Axisymmetric Jet
March 8*.7truecm Bo Norman, Dept. of Pulp and Paper Chemistry and
Technology:
Fluid mechanics problems within the paper forming process
March 22.7truecm Masaharu Matsubara, Dept. of Mechanics:
Visual study of boundary layer transition with free stream turbulence
April 3*.7truecm Lars Ödberg, STFI, and Tie-Qiang Li, Dept. of
Paper Technology:
Studier av strömningsförlopp i fibersuspensioner med avbildande NMR
April 12.7truecm Per J Olsson, Dept. of Mechanics:
Simulation of the Flow Past Multiple Spheres
May 3*.7truecm Claes Inge, ALFA-LAVAL Separation AB:
Flow and pressure drops in a centrifugal separator
May 17.7truecm Mats Ullmar, Dept. of Pulp and Paper Chemistry and
Technology:
On the evolution of roughness-induced TS waves in a flat plate boundary layer
May 24.7truecm Per Elofsson, Dept. of Mechanics:
Oblique wave transition in plane Poiseuille flow
* Seminars were organized within the Research centre for the fluid mechanics of industrial processes.
Theoretical and Applied Mechanics seminar series Coordinatorer: L. Söderholm
November 9.7truecm Claes Hedberg, Dept of Mechanics:
The effect of phase on nonlinear propagation and
the one saddle point solution of Burgers' equation.
December 7 .7truecm
Dr Anders Karlhede, Department of Physics, University of Stockholm:
The problem of equivalence in general relativity.
February 2.7truecm Karl-Erik Thylwe, Dept. of Mechanics:
Regge-pole analysis.
February 22, 1995 .7truecm
Dr Anders Szepessy, NADA, KTH:
Viscous effects of Broadwell shocks.
5 April, 1995 .7truecm
Prof. Arne Johansson, Dept of Mechanics, KTH:
Turbulence modelling for non-modelers.
26 April, 1995 .7truecm
Dr Per Dahlqvist, Dept of Mechanics, KTH:
Diffusion and confusion.
May 3.7truecm Mihaela Dumitru, PUB, Bucharest:
Optics and non-linear optics study and research by computer aided training
10 May, 1995 .7truecm
Dr. Claes-Ingvar Lagerkvist, Observatory, Univerisity of Uppsala:
The Uppsala-ESO Survey of Asteroids and Comets.
Other seminars by invited speakers
August 22 .7truecm Dr. Wilton W. King, Georgia Institute of
Technology:
Industrial applications of mechanics.
September 7.7truecm Dr. Shigeo Kimura,
Tohoku National Industrial Research Institute:
A velocitymeter for groundwater flows.
September 13 .7truecm
Prof. T. Sakurai, Kyoto University:
MHD spin-down problem in a circular cylinder subject to
the effect of stable stratification.
September 27, 28, 29, October 3 .7truecm
Prof. P.L. Sachdev, Indian Institute of Science, Bangalore, India:
Recent development in the theory of Burgers' and the generalized
Burgers' equations.
October 6 .7truecm
Prof. Tony Chen, Univ. of Arizona:
Convection in a mushy layer during
directional solidification.
October 18 .7truecm
Prof. Tomasz Kapitaniak, Univ. of Lodz::
Introduction to chaos.
October 19 .7truecm
Prof. Tomasz Kapitaniak, Univ. of Lodz::
Control and
synchronization of chaos.
October 24 .7truecm Dr. Martin Oberlack, RWTH, Aachen:
A new length-scale and dissipation tensor equation for
turbulent flows.
November 8 .7truecm Dr. N. Andersson, Cardiff Univ.:
Aspects of black hole scattering.
March 17, 1995.7truecm Dr. Yuri Kachanov,
Institute of Theoretical and Applied Mechanics, Russian Academy of
Sciences, Novosibirsk:
Experimental studies of 3D boundary layers instability to travelling waves at
controlled disturbance conditions.
May 18.7truecm Prof. Helmut Eckelmann, Univ. Göttingen:
Properties of the laminar and transitional wake of a circular cylinder.