Uncertainties in the interpretation of data from turbulent boundary layers due to measurement errors

Författare: Vinuesa, R., Nagib, H.M.
Dokumenttyp: Artikel
Tillstånd: Accepterad
Tidskrift: 64th Annual Meeting of the American Physical Society, Division of Fluid Dynamics. 22 November 2011, Baltimore, MD, USA.
År: 2011


Composite expansions based on log law and power law were used to generate synthetic velocity profiles of ZPG turbulent boundary layers in the range 800  Re  8.6 × 105. Several artificial errors were then added to the velocity profiles to simulate dispersion in velocity measurements, error in determining probe position and uncertainty in measured skin friction. The effects of the simulated errors were studied by extracting log-law and power-law parameters from all these pseudo-experimental profiles, regardless of their original overlap region description. Various techniques were used, including the diagnostic functions ( and ??) and direct fits to logarithmic and power laws, to establish a measure of the deviations in the overlap region. The differences between extracted parameters and their expected values are compared for each case, with different magnitudes of error, to reveal when the pseudo-experimental profile leads to ambiguous conclusions; i.e., when parameters extracted for log law and power law are associated with similar levels of deviations. This ambiguity was observed up to Re = 16, 000 for a 3% dispersion in the velocity measurements and Re = 2, 000 when the skin friction was overestimated by only 2%. With respect to the error in the probe position, an uncertainty of 400 ?m made even the highest Re profile ambiguous. The results from the present study are valid for air flow at atmospheric conditions.