kth_logo.gif

Article

On the pulsating electric wind of a Single Dielectric Barrier Discharge (SDBD) plasma actuator

Authors: Vernet, J., Örlü, R., Alfredsson, P.H.
Document Type: Conference
Pubstate: Published
Journal: 67th Annual Meeting of the APS Division of Fluid Dynamics, Nov. 23–25, 2014, San Francisco, CA.
Volume:   
Year: 2014

Abstract

An experimental study is conducted on the electric wind produced by a Single Dielectric Barrier Discharge (SDBD) plasma actuator placed at the top of a half cylinder. Laser Doppler Velocimetry (LDV) measurements were performed and results show that increasing the driving voltage (6-16 kV peak-to-peak) and frequency (0.5-2 kHz) of the actuator increases the induced jet velocity (up to 4 m/s) and thus the momentum added by the actuator. The focus of the present study is on the phase-resolved behavior of the electric wind, in particular, its two strokes. Phase-averaged LDV data reveals that while the velocity during both strokes remains positive, there is nearly a factor of two in amplitude. The difference of behavior between the two strokes and its downstream and wall-normal evolution are mapped for various driving voltages. Results indicate that this difference is restricted to the vicinity of the actuator, thereby justifying the assumption of a steady force in simulations to model the induced force. The study is part of a larger investigation aiming at separation control on the A-pillar of a truck cabin.

absimage.aps.org/image/DFD14/MWS_DFD14-2014-000096.pdf